Data
This Test is suitable for short time COD at 160°C within 30 minutes.
In contrast to the conditions described in the ISO 15705, the short time COD is characterised by a higher digestion temperature and reduced reaction time. Therefore we recommend comparing the results of the short time COD from time to time with measurements made under the conditions of ISO 15705 (150 ± 5°C / 2h ± 10 min).
Benefits of NANOCOLORtube tests in comparison to ISO 6060:
The new ISO 15705 is based on the same chemical reaction as the established ISO 6060. The water contents are oxidized by sulfuric acid and potassium dichromate in the presence of silver sulfate and mercury(II) sulfate. Compared with the ISO 6060, the new method, described in the ISO 15705 has significant advantages:
€¢ Five times less mercury
€¢ Comparably less other toxic and hazardous reagents
€¢ All reagents are pre-dosed in round tubes
€¢ Reduced risks for the user
€¢ Reproducible results because of photometric determination
If the chloride content exceeds 1500 mg/L the sample has to be diluted with COD-free water, or you may use the chloride complexing agent. Lower chloride concentrations are masked by the mercury(II) sulfate present in the test tubes.
Please note COD accessories:
Chloride complexing agent REF 918 911
for COD determinations with chloride concentrations from 1000€“7000 mg/L Cl€“
Sufficient for: 100-200 tests
Shelf life: at least 1.5 years
Cartridges for chloride elimination REF 963 911
for removal of up to 2000 mg/L Cl€“ per cartridge
Pack of: 10 cartridges
Shelf life: at least 1 year at 2€“8 °C
COD-free water REF 918 993
for control of measurements and dilution of water samples
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
NANOCOLOR® Equipment
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.
What's the process for buying Chemicals?
Business User - You should have an account with Camlab so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110
Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.
Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.
Delivery to Home addresses?
Camlab use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.
Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.
Home office scheme for details click here
Are Camlab chemicals suitable for clinical or other medicinal use?
Camlab supply chemicals for laboratory use only, they are not suitable or recommended for any other use.
Are Camlab chemicals suitable for food use?
Camlab supply chemicals for laboratory use only, they are not suitable or recommended for food use.
The sample should be thoroughly mixed or homogenized in a blender to be as representative as possible for the COD of the water to be examined.
COD determinations should be performed as soon as possible after sampling. If this is not possible, the pH should be reduced to 2 or less by the addition of 2 mL of concentrated sulphuric acid H2SO4 per 1 L of sample.
Storage of the acidified sample at room temperature: Analysis within 7 days.
Storage of the acidified sample at 4 °C: Analysis within 28 days.
Rapid decomposition is not possible for all COD tests. Depending on the composition of the test, the water content can be higher. This results in a higher vapour pressure during the decomposition and increases the risk for bursting of the test tube. For more information about decomposition, please see the respective instruction leaflet.
PHP (potassium hydrogen phthalate) is used as a reference substance.
NANOCOLOR COD tube tests have advantages over the German norm DIN 38409-H41 in terms of use of toxic chemical compounds and user-friendly handling. Furthermore, seven NANOCOLOR COD tests meet the requirements of the DIN ISO 15705:2002 standard.
For cumulative parameters, the sample must not be filtered prior to decomposition! By filtration, compounds which are poorly soluble are removed. Those compounds would thereby escape the detection which would lead to wrong results.
For a determination of dissolved COD, filtration of turbid samples using the membrane filtration kit 0.45 µm (REF 91650 / 91652) or glass fibre paper MN 85/90 BF is recommended. These filters are tested and validated specifically for this purpose.
Seawater suitability
Seawater analysis is generally not possible because of chloride interferences.
A chemical oxygen demand (COD) test is used to measure the amount of organic compounds in a water sample. It measures the capacity of water to consume oxygen during the decomposition of organic matter and the oxidation of inorganic chemicals such as Ammonia and nitrate. You can see a video on the common method of testing COD with vials in our video here. The start of the COD testing meth...
Spectrophotometers are relied on by a wide range of laboratories, for tests ranging from specific parameters, like chlorine or metals concentrations, right through to complex analyses of reaction kinetics. When choosing a spectrophotometer the range of specifications and price is vast, so take the time to list the features you need before you buy and make sure you choose the right one. [c...
Related Products
Check items to add to the cart
Add to Wish List
Add to Compare
Print Page
