Nabertherm high temperature 650°C laboratory and industrial oven 60l

Nabertherm high temperature 650°C laboratory and industrial oven 60l

The Nabertherm NA 60/65 60 litre capacity high temperature oven uses forced convection to heat to temperatures upto 650°C. These heating chambers are designed for use in science, research, laboratories and industrial applications such as annealing, crystalising, preheating, curing and tool making. They are supplied with an integrated touch screen controller and with a free downloadable app allowing you to monitor progress of your oven via a simple wifi connection.

The high temperature oven is customisable with a range of options.

Features:

• Heats to 650°C (fully programmable)
• B510 controller offering 5 progams each with 4 programmable segments
• Swing door hinged on the right
• Horizontal air circulation with optimum distribution through stainless steel baffles
• Temperature uniformity of +/- 4ºc
• One frame sheet supplied with rails for upto 2 additional trays as an option
• Base frame included
• 910mm x 1390mm x 1475mm (wxdxh)
• 350kgs

Mobile monitoring App:

• Free and easy to download
• Connects via wifi to furnace controller and does not interfere with local business LAN systems
• Provides live monitoring for single or multiple furnaces simultaneously
• Provides a visual status of the furnace progress
• Provides push notifications
• Shows operating status of each furnace

Training:

• Free remote web based basic training covering the key features by Camlab employees

Warranty:

• 12 months manufacturers parts warranty
• 12 months Camlab labour warranty

Power supply:

• Three phase power

Options:

• 120l, 255L and 500l capacity variants
• 650°C and 850°C temperature range variants
• Air inlet and exhaust flaps for drying
• Controlled fan assisted cooling
• Manual lift door
• Pneumatic lift door
• Additional trays / frame sheet
• Gas supply boxes
• Feed and charging aids
• Charge control with documentation of the charge thermocouple

Ancillaries:

• Heat protective gloves
• Loading tongs

Verification and commissioning options:

• Camlab commissioning
• Installation Qualification
• Operational Qualification
• Performance qualification
• Single point calibration

Safety

This furnace is not suitable for processes generating explosive gas mixtures, e.g. debinding processes. If used for these kind of processes the concentration of organic gases in the furnace must never exceed 3% of the lower explosion level. This precondition is not only valid for normal operation but in particular for exceptional circumstances, e.g. process failures (caused by a module breakdown etc).

A wide range of furnaces, which are specially designed for processes generating explosive gas mixtures is available or indoor use only.

For indoor use only.