The Cole-Parmer FF-200D-I is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations.
The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time.
Designed for industrial analysis
Includes: Na, K, Li, Ca and Ba filters, two meters each of gas and air tubing, air and gas nozzles, drain trap, clips, cleaning wire, and power cord.
Effective June 2022, the Jenway Analytical Flame Photometer Model PFP7 has now been rebranded Cole-Parmer under Model number FF-200D-I.
| Specification | FF-200D-I |
| Parameter | FF-200 |
| Range | 0 to 199.9ppm |
| Limits of detection | Na 0.2ppm, K 0.2ppm, Li 0.25ppm, Ca 15ppm, Ba 30ppm |
| Reproducibility | <1% coefficient of variation for 20 consecutive samples using 10ppm. Na set to read 50 |
| Linearity | < 2% error when 3ppm Na/K and 5ppm Li are set to read 100 |
| Stability | < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5% |
| Recorder output | Nominal 1.00V for a reading of 100.0 |
| Electrical supply | 90-125V or 190-250V at 50/60Hz |
| Air supply | Moisture and oil free, 6 litre/min at 14psi |
| Fuel | Propane, butane, natural gas or LPG |
| Size (w x d x h) | 420 x 360 x 300mm |
| Weight | 8kg |
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
Testing for Sodium is often required in food or blood samples. Some water samples may need to be tested, particularly those where a softening system is used. Due to the nature of sodium's chemistry, it cannot be tested by a simple test kit method. We've taken a look at why this is, and explored what options are available for testing sodium. [caption id="attachment_8317" align="aligncenter" wi...
Add to Wish List
Add to Compare
Print Page
