Cole-Parmer CN-200D digital controller provides a convenient means of temperature control, using microprocessor techniques to give ease of operation and good accuracy.
Features:
The CN-200D Digital Controller may be used in conjunction with a suitable heating or cooling device e.g. Electromantle or Electric Bunsen. For clear operation, the CN-200D Digital Controller has an on/off Power switch, “power on” amber neon indicator and an exit/standby button.
It can be used in three ways:
Programming is done via the up/down controls on the front panel and the 3 digit LED display allows you to set a 1°C resolution over a range of -10°C to 800°C. Temperature sensing is performed by a plug-in PTFE covered platinum resistance thermometer probe which is suitable for measurements up to 270°C. There is a 5 pin DIN socket for the temperature probe. The sample temperature is displayed on the 3-digit LED display.
The CN-200D digital controller has a zinc die-cast outer case, and is suitable for bench and retort stand mounting or wall mounting using the wall bracket and retort rod clamps provided. It has a short mains output lead with an IEC socket to connect it to the resistive load. An accessory extension mains lead is available where remote operation is required (e.g. in a fume extraction unit).
Effective May 2022, the Electrothermal heating controller Model number MC810B has now been rebranded Cole-Parmer under Model number of CN-200D. All the same great features and specifications, just with a new and improved look.
Specification | CN-200D |
Min. temperature | -10° C |
Max. temperature | 800° C |
Accuracy | ±2°C |
Resolution | 1 |
Display type | 3-digit LCD |
Control input RTD | 100 Ω Pt, 5-pin DIN |
Control output | 1500W |
Electrical requirements | 230V, 50/60Hz, 1500W |
Controller power consumption | n <2W |
Dimensions (d x w x h) | 100 x 120 x 80mm |
Weight | 1.1kg |
For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
Request Consultation |
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |