Maintenance kit for SD400 includes membrane cap and micro SD card with software and calibration data
Lovibond has two variations in its range of waterproof handheld meters. These electrochemical measuring instruments are designed for safety, mobility, and ease of data retention and storage. The data loggers regularly save the collected measurement data which can be transferred to the computer via USB interface (serial or analogue). With the SD 305 series, the instrument is protected with armoring and the electrode holders can be handled comfortably with one hand even under adverse conditions. With its luminescence technology and drift-free optical measurement, the SD 400 Oxi L offers analysis at the highest level with low maintenance requirements.
These are portable handheld instruments for the determination of pH values. It is reliable, waterproof (IP67), and robust, making it an ideal solution for on-site analysis. Three different models of this meter for the determination of pH/Redox/Temperature, Conductivity/TDS/Salinity/Temperature, and Dissolved Oxygen (O2)/O2 -Concentration/O2 -Saturation Temperature.
SD 400 Oxi L portable meter combines measurement f dissolved oxygen at an advanced level with low maintenance thanks to state-of-the-art luminescence technology it is suitable for research and teaching, use in sewage and waterworks, and aquaristics.
The electrode of the SD 400 Oxi L is optimized for standard BOD bottles (NS 19/26). The device is therefore ideally suited for standard-compliant BOD determination of the dilution BOD.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.