The brand new Lumiso Pooltest 6 enables a complete water balance calculation, with tests for alkalinity, bromine, calcium hardness, chlorine, cyanuric acid and pH.
Have full confidence in your results and data compliance
Lumiso uses expert colorimetric analysis to deliver quick and clear results, enabling pool operators to perform water balance and optimise pool treatment. View results on the instrument data log or use the USB to manage your data on a PC.
New lightweight kit, inclusive of all required accessories
The new Lumiso Pooltest 6 is packaged in a custom case, inclusive of all necessary reagents and accessories. With space for additional items including spare test tubes and check standards, there is no need to carry additional equipment.
Inclusive of standard and extended range chlorine
The new Lumiso Pooltest 6 removes the need for choice or dilution by including both standard (0 – 5 mg/L) and extended range chlorine (0 – 10 mg/L).
Deliver water balance and pool safety with Lumiso Pooltest 6
Regular testing of pool and spa facilities is required to ensure the safety of swimmers and to protect the pool infrastructure. Lumiso Pooltest 6 includes testing for alkalinity, bromine, calcium hardness, chlorine, cyanuric acid and pH, to optimise your treatment plan and ensure water safety for pool users.
Completely waterproof and suitable for humid environments
Whilst we would always recommend keeping your instrument and kit clean and dry, we know that from time to time it will inevitably become wet or end up in the pool. That’s why Lumiso has been optimised for poolside use or use in humid environments, with an advanced instrument sealing system and a waterproof reagent box which can be restocked with reagent refill packs. Not only does this protect from water damage, but also minimises the amount of packaging used in our kits.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.