£27.47 excl. VAT
£32.96 inc. VAT
The Pooltester is designed for the simultaneous determination of the most popular water treatment agents and the pH value.
Highlights
Title | Parameter and Range | Part Number |
---|---|---|
Pooltester Chlorine LR-pH
|
Chlorine 0.1 - 3.0 mg/l Cl2 pH 6.8 - 8.2 |
151600 |
Three-Chamber-Tester Chlorine LR-pH
|
Chlorine 0.1 - 3.0 mg/l Cl2 pH 6.8 - 8.2 |
151610 |
Pooltester Chlorine HR-pH
|
Chlorine 0.5 - 6.0 mg/l Cl2 pH 6.8 - 8.2 |
151601 |
Pooltester Bromine-pH
|
Bromine 1.0 - 8.0 mg/l Br2 pH 6.8 - 8.2 |
151604 |
Pooltester Active oxygen-pH
|
Active-oxygen 0 - 10 mg/l O2 pH 6.8 - 8.2 |
151605 |
Pooltester Copper LR/HR-pH
|
Copper 0.1 - 1 mg/l Cu Copper 0.5 - 5.0 mg/l Cu pH 6.8 - 8.2 |
155190 |
Pooltester Copper-pH-Active oxygen
|
Active-oxygen 0 - 10 mg/l O2 Copper 0.1 - 1 mg/l Cu pH 6.8 - 8.2 |
155235 |
Pooltester Biguanide-PHMB/ H2O2/pH
|
Hydrogen peroxide 5 - 50 mg/l H2O2 pH 6.8 - 8.2 PHMB 10 - 100 mg/l PHMB |
156100 |
Pooltester Multipooltester 5 in 1 in plastic case
|
Alkalinity-m 20 - 800 mg/l CaCO3 Calcium hardness 20 - 800 mg/l CaCO3 Chlorine 0.1 - 3.0 mg/l Cl2 Cyanuric acid 20 - 200 mg/l CyA pH 6.8 - 8.2 |
151900 |
Pooltester Phosphate Test Kit, in plastic case
|
Phosphate 0 - 1000 ppb | 157800 |
An important point to note apart from the table below please consult.
Parameter | Â | UK Recommended Levels |
Bromine | Â |
4-6 mg/L |
Calcium Hardness | Â |
80 – 200 mg/L |
Chlorine (Free and Total) |  |
|
Cyanuric Acid | Â |
|
pH | Â |
|
Phosphate |  | 0.01 mg/L or below. |
Total Alkalinity |  | 80 – 200 mg/L CaCO3 |
Turbidity |  | 0.5 NTU (Nephelometric Turbidity Units) |
Parameter | Â | UK Recommended Levels |
Chlorine | Â | 1.0 mg/L |
Bromine | Â | 4-6 mg/L |
PHMB | Â | 20-40 mg/L |
Hydrogen Peroxide | Â | 30-100 mg/L |
Ozone | Â | 1 mg/L for two minutes |
pH | Â | 7.2-7.4 ideally, 7.0-7.6 is acceptable |
Alkalinity | Â | Between 80-200 mg/L |
Cyanuric Acid | Â | 25-50 mg/L |
Calcium Hardness | Â | Below 80-200 mg/L |
Phosphate | Â | Below 0.01 mg/L |
TDS | Â | Not more than 1000 mg/L above mains water, to a maximum of 3000 mg/L |
Salinity | Â | Between 2500-3500 mg/L |
Turbidity | Â | Less than 0.5 NTU |
Colony Count | Â | Not more than 10 CFU per 100 mL |
Total Coliforms | Â | Absent in 100 mL |
E. coli |  | Absent in 100 mL |
Ps. Aeruginosa | Â | Absent in 100 mL |
Products in this Range