Purite Labwater 2 with 3m coil and dispensing gun
A simple, cost effective method of producing 1 -10μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.*
The Labwater units incorporate an easily replaceable cartridge, containing specifically designed resin, which colour changes through absorption of ionic contaminants, facilitating a low level of maintenance. On complete colour change from blue to brown, replace the cartridge.
The Purite Labwater 1 unit has a maximum flow rate of 60 litres per hour* and comes complete with:
The units are typically wall mounted and are simply connected via a dedicated hose (supplied separately, 12mm fitting) to a tap or stopcock and operate direct from mains water pressure thus requiring no external electrical supply.
* These units are capable of producing deionised water at 60 litres per hour but would become very quickly exhausted which is why they are recommended for low use applications. For high use applications please see other models in the Purite range.
System specifications when fitted
|Technical Specifications||Labwater 2|
|Max feed pressure (bar)||0.5-5 bar (7 - 75psi|
|Max feed flow rate (max ltr/hr)||60 ltr/hr|
|Output Capacity, litres|
|50mg/l tds (soft)||1280 litres|
300mg/l tds (hard)