The 67 series spectrophotometers from Jenway feature innovations such as colour touch screens, interchangable sample holders and Qwheel control.
Three models are available: 6700 Visible Spectrophotometer with a tungsten lamp, 6705 and 6715 UV/Vis spectrophotometer fitted with a pulsed xenon lamp for the whole wavelength range.
A sealed QWheel is provided for fine cursor control or scrolling. With this cutting-edge user interface and novel operating system the 67 series offer the simplest, most intuitive operation in their class.
Secure multi-user operation can be selected where each users settings, methods and results are protected by PIN codes. A designated supervisor can control user access and back up data and settings. Open, free use is always available at any time without logging in to the protected areas. For extra security stored information can be held on a removable memory card.
All data, methods and settings can be transferred to another instrument or PC using the removable SD/USB memory card. Multiple instruments are easily formatted with identical settings, while the latest methods can always be uploaded from the memory cards.
The PC software included enables the easy transfer of data and methods from the instrument or SD memory card to the computer for printing, storage, presentation or further manipulation.
The removable sample chamber enables a number of plug-in accessory modules to be fitted, making the rapid configuration (and reconfiguration) of the desired sampling options possible. Accessory modules include an eight cell auto changer, a sipper pump for flow-through cuvettes, a peltier temperature controlled cuvette holder and peltier/sipper system, as well as single 10mm cuvette, long path length and test tube holders.
The 67 series offer the following modes of operation
QWheel is a trade mark of Quantum Technology Group.
Supplied with 10 x 10 mm cuvette holder, 1GB of internal memory, 1 GB SD/USB memory card, 100 disposable cuvettes, user manual, power cable, PC software and interface cable.
Please note printer shown is not included and must be ordered separately.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.
Products in this Range