In the laboratory, Memmert incubators are ideal for all applications with temperatures up to +80°C specifically for incubating living cultures at +37 °C.
Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully.
Temperature range up to +80 °C
8 model sizes 30 to 750
2 model variants: SingleDISPLAY and TwinDISPLAY
Natural convection - N
Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
Activation of sterilisation routine via ControlCOCKPIT
To guarantee optimum air circulation in the incubator chamber even when it is fully loaded, both model variants SingleDISPLAY and TwinDISPLAY are available with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence.
Specific use in Accordance with the german MPG (Law on medical devices)
Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing; Stainless Steel - An incubator almost for ever
In accordance with the German Law on Medical Products (Directive 93/42/EEC), the incubators IN/ IF and INplus /IFplus can be used for the warming of irrigation solutions and infusions
65 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our incubators
Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load
A wide range of options for programming and documentation using interfaces, integrated data logger and AtmoCONTROL software
The temperature values of all incubators are measured according to DIN 12880: 2007-05
Each incubator is safety-tested and bears the CE mark
Camlab recognises the importance of providing our customers with a "whole life" solution when purchasing equipment from us. When buying equipment from us we offer a range of options to help your piece of mind and these are summarised below:
Manufacturers warranty - your memmert unit is supplied with a comprehensive manufacturer's 3 year "parts only" warranty that excludes consumables and "lifed"items like door seals.
In addition to this 3 year parts only warranty Camlab will repair any qualifying failure free of charge during the first 12 months of use.
Extended warranties are available as Warranty Plus and Warranty Plus Heavy Use options
Validation of Temperature and Humidity Set Points
All Memmert units are provided with a Certificate of Conformity. If a Validation Certificate is required, this would need to stipulated on the order and performed at the factory in Germany before the unit is depsatched. The temperature and/or humidity validation points would need to be advised at the point of purchase.
Even if you have had a Memmert instrument for some time without a service contract or you have acquired it through another channel Camlab can service and maintain it for you in accordance with Memmert guidelines. Our fully qualified service engineers can visit your site and make a full assessment of the condition of the intrument and recommend a full maintenace protocol for you. If serviced regularly and lifed items are replaced regularly Memmert equipment will be reliable and dependable, ensuring that downtime is kept to the absolute minimum. Service contract customers receive a priortiy service and we can cover any extended downtime with a loan instrument should the need arise.
9 or 27 Point Mapping Aftersales Service
Temperature mapping is one element of the operational qualification of your oven. Our engineers are both trained andqualified to provide a full temperature mapping service in accordance with the manufacturer’s recommendations. This isa full day activity with a maximum 2 temperatures being mapped at either 9 or 27 sensor points in your oven. For each temperature, 60 measurements (1 per minute) are taken at each sensor point and you will be provided with a report showingthe results normally 2 weeks after. Whilst on site our engineers will be able to discuss any issues with you and determine whether any adjustments, modifications or repairs are required.
Operational/Performance Qualification OQ/PQ
We also complete a wide range of operational checks (OQ) to determine how your oven is operating. This includes checking every process relating to alarms, switching and control functions. PQ can either be carried out as a standalone activity or after the OQ checks. A full report pack is completed during the tests for your records. Whilst on site our engineers will be able to discuss any issues with you and determine whether any adjustments, modifications or repairs are required. This is a verification service only. Please read the related terms and conditions associated with any faults found.
For detailed quotations and servicing enquiries please call 01954 233110 or email firstname.lastname@example.org
For more information on this product please click the Request information button below and we will get back to you as soon as we can.