The Hach DR1900 spectrophotometer is ideal for the field and is designed to go where you need to go.
Water testing in the field takes you to potentially dusty and wet conditions where less rugged equipment simply will not last. The Hach DR 1900 is built with the field user in mind the instrument has a large easy-to-ready screen and a simple user interface that makes testing easier than ever, even in the harshest conditions.
Underneath the rugged exterior, the spectrophotometer has over 220 of the most commonly tested water methods already built in. If you want, use the easy-to-use interface to create your own methods to test what is important to you.
Tests are performed with a wavelength range of 340 to 800 nm which make this a field instrument you can use to find results typically only seen in laboratory instruments.
Compatible with the full range of Hach LCK vials in the 13mm format
Please note: Hach LCK cuvette test evaluation possible, but without barcode reading & 10 fold measurement feature.
|Battery life:||15 days (typical) @ 5 readings a day / 5 day week without backlight*
* Backlight usage will decrease battery life.
|Battery requirements:||4 AA size batteries|
10 mm square / 1 inch square
13 mm / 1 inch round
13 mm and 1 inch round 10 x 10 mm 1 inch square
adapter for round vials and 10x10mm
|Data storage:||500 measured values (Result, Date, Time, Sample ID, User ID acc. to GLP)|
|Dimensions (H x W x D):||98 mm x 178 mm x 267 mm|
|Display:||Graphical display 240 x 160 pixel (LCD, b/w, backlit)|
Enclosure waterproof rating:
|Environmental conditions:||relative humidity:Max. 80 % relative humidity (non-condensing)|
|Environmental conditions:||temperature:10 - 40 °C|
|Interface:||USB type Mini IP67 (with optional Module)|
|Operating conditions:||10 - 40 °C, max. 80 % relative humidity (non-condensing)|
|Operating mode:||Transmittance (%), Absorbance and Concentration|
|Optical system:||Reference beam, spectral|
|Photometric accuracy:||± 0.003 Abs @ 0.0 - 0.5 Abs|
|Photometric linearity:||< 0.5 % (0.5 - 2.0 Abs)|
|Photometric measuring range:||0 - 3 Abs (wavelength range 340 - 800 nm)|
110 - 240 V / 50/60 Hz
4 x AA size Alkaline
|Pre-programmed methods:||220 (Please note: LCK cuvette tests can be evaluated, but without 10-fold rotational measurement and barcode readers.)|
|Reproducibility:||± 0.005 Abs (0 - 1 A)|
|Source lamp:||Xenon Flash|
|Stray light:||< 0.5 %T at 340 nm with NaNO2|
|± 2 nm (range 340 - 800nm)|
|340 - 800 nm|
|Includes: portable spectrophotometer, printed basic instrument manual, dust cover, 1-in. square matched glass sample cells, AA alkaline batteries 4/pk, and a four-type adapter set.|
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
Check items to add to the cart