Fryka Cooling Baths -20°C and -40°C

KB COOLING BATH - For use with existing thermostats or as a cold trap.

KT COOLING BATH WITH THERMOSTAT - For internal and external operation with a built-in circulating pump. Electronic temperature regulation with PT100 thermocouple, control precision ±0.5K at the set point The set point on these baths is calibrated at -40C, There will be some variation in temperature based on set point and cooling fluid used. Set point calibration can be done by the user or on order placement if the desired set temperture is supplied. All the KT series baths incorporate a socket to allow connection to a PT100 external sensor.

CASING - Galvanised steel sheet, electrostatically coated in RAL 9003white, fitted with a blue protective ring around top and bottom.

SPECIAL STEEL COVER - With deep-drawn tank. The upper edge is heated, preventing the formation of ice or condensation. Four M8 internal threaded fastening bolts are mounted at the corners to accept the cover or support bars.

COOLER - Cooling baths are fitted with a quiet hermetically sealed, intrinsically safe, air-cooled compressor.