Stress-free measurement, high-end model
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our high-end benchtop model was developed to provide simplicity with excellent on-site usability - from operation and maintenance through to troubleshooting.
LAQUA’s large capacitance touch screen panel:
Functions:
Meter Kit Available:
F-74A-S
The appearance of items in the picture are subject to change in each region.
Package Details:
| LAQUA F-74 | ||
|---|---|---|
| pH | Measurement method | Glass electrode method |
| Measurement range | pH 0.000?14.000 | |
| Display range | pH -2.000?20.000 | |
| Resolution | 0.01/0.001 pH | |
| Auto range select | ? | |
| Repeatability | ±0.001 pH±1 digit | |
| pH calibration point | 5 | |
| Repeatability check | ? | |
| Alarm limit of calibration | ? | |
| Periodical check | ? | |
| mV(ORP) | Measurement range | ±1999.9 mV |
| Resolution | 0.1 mV | |
| Repeatability | ±0.1 mV±1 digit | |
| Temperature | Measurement range | 0.0?100.0? (-30.0?130.0?? |
| Resolution | 0.1? | |
| Repeatability | ±0.1?±1 digit | |
| ION | Measurement method | Ion electrode method |
| Measurement range | 0.00 μg/L?999 g/L (mol/L) | |
| Resolution | Valid numbers 3 digits | |
| Repeatability | ±0.5% ±1 digit | |
| Periodical check | ? | |
| Calibration curve point | 5 | |
| Addition method measurement | ? | |
| Conductivity | Measurement method | 2 AC bipolar method |
| Measurement range(Display range) | Cell constant 100 m-1?0.000 mS/m?19.99 S/m Cell constant 10 m-1?0.0 μS/m?1.999 S/m Cell constant 1000 m-1?0.00 mS/m?199.9 S/m |
|
| Resolution | 0.05% of full scale | |
| Repeatability | ±0.5% ±1 digit | |
| Change unit | ? | |
| Distilled water temperature conversion | ? | |
| Periodical check | ? | |
| JP/EP/USP/CP Pharmaceutical water aplication | ? | |
| Salinity | Measurement method | Conversion from conductivity value |
| Measurement range(Display range) | 0.00?80.00 PPT (0.000%?8.000%) | |
| Resolution | 0.01 PPT (0.001%) | |
|
Salt concentration calibration |
? | |
| Resistivity | Measurement method | Conversion from conductivity value |
| Measurement range(Display range) | Cell constant 100 m-1?0.00 Ω?m?199.9 kΩ?m Cell constant 10 m-1?0.0 Ω?m?1.999 MΩ?m Cell constant 1000 m-1?0.000 Ω?m?19.99 kΩ?m |
|
| Resolution | 0.05% F.S. | |
| Repeatability | ±0.5%F.S.±1 digit | |
| TDS | Measurement method | Conversion from conductivity value |
| Measurement range(Display range) | 0.01 mg/L ?1000 g/L | |
| Resolution | 0.01 mg/L | |
| Input/output | Input(CH) | 2 |
| USB peripherals (Communication with PC)*1 |
? | |
| USB host?USB memory) | ? | |
| RS-232C(Printer/PC) | ? | |
| Analog out put | ? | |
| Data | Memory number | 2,000 |
| Interval memory | ? | |
| ID input | ? | |
| Data search | ? | |
| Display | Display | Color graphic LCD with capacitive Touch Panel |
| Dual component display | ? | |
| Multilanguage display | Japanese/English/Chinese/Korean | |
| Function | Navigation function | ? |
| User gide | ? | |
| Graf display | ? | |
| Printer connectivity?GLP/GMP? | ? | |
| Custom printing function | ? | |
| temperature compensation?Auto/manual) | ? | |
| AutoHold function | ? | |
| AutoHold setting | ? | |
| Stability function (pH/ION) | ? | |
| Register operator | ? | |
| Security(pass word? | ? | |
| Version up function | ? | |
| Ambient temperature | 0 ? ? 45? | |
| Power | AC adaptor 100 ? 240 V 50/60 Hz | |
| Dimensions | 170(W)×174(D)×73(H)mm(Excluding electrode stand and AC adaptor) | |
| Power consumption | Approx. 9.8 VA | |
| Mass of main unit | Approx .700 g | |
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
What is conductivity? Conductivity is a measure of the ability of a substance to conduct an electrical flow through it. In water, many compounds and molecules (such as dissolved salts and inorganic materials) dissociate into constitutive ions. Ions are small sub-atomic particles and carry with them an electrical charge; either positive (cations) or negative (anions). These particles help condu...
Add to Wish List
Add to Compare
Print Page
