The Edge meter by Hanna Instruments allows use on the benchtop, as a handheld meter or in a wall mount, for maximum flexibility and can be used with 1 probe to measure either pH, conductivity or dissolved oxygen.
Offering advanced technology for measuring, the smart, slim-line design means Edge can be used as a handheld, wall mounted or bench top meter.
The cutting edge design, capacitive touch keypad and intuitive user interface are just some of the features that make the meter stand out.
Each parameter is measured by a unique digital electrode. Connected by a easy plug-in 3.5mm connector, the smart electrode enables Edge to automatically recognise and store the sensor type, ID and calibration information.
Programmed for basic and advanced modes, Edge offers simplified features for routine measurements, or detailed data display. It warns the user if the electrode is not clean, or if the buffers are contaminated during calibration, using the exclusive Hanna CAL-CHECK feature. What's more, Edge will also warn you if the pH bulb is cracked or if the junction of the electrode is compromised.
Capacitive touch keypad
Large 140mm LCD display with clear full text readout
Digital smart electrode enables Edge to automatically recognise and store sensor type, ID and calibration information
Slim lightweight design for handheld, bench top or wall mounted use
PC interface via micro USB
Data download to USB stick via standard USB connection
GLP data automatically transferred
Dimensions: 202mm x 140mm x 12.7mm
Range: -2.00 to 16.00 pH and -2.000 to 16.000 pH
Resolution: 0.01 pH and 0.001 pH
Accuracy: ± 0.01 pH and ± 0.002 pH
Calibration: automatic, 5 in standard mode, 3 in basic mode
Temperature Compensation: automatic, -20 to +120°C
Electrode: HI 11310 double junction refillable pH electrode complete with temperature sensor (ATC)
Range for Conductivity: 0.00µS/cm to 500mS/cm in 5 ranges
Range for TDS: 0.00mg/L to 400g/L absolute TDS in 6 ranges
Range for Salinity: 0.0 to 400% NaCl, 0.01 to 42.00 PSU or 0.0 to 80.0 g/L
Electrode: HI 763100 Conductivity probe
Accuracy for conductivity, TDS or salinity: ±1% of reading
Range: 0.00 to 45.00 ppm or 0.0 to 300% saturation
Resolution: 0.01ppm or 0.1% saturation
Accuracy: ±1.5% of reading
Calibration: one or two points at 0% (with HI-7040 solution) and 100% (in air)
Temperature Compensation: automatic 0 to 50°C, RH max 95%
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.