Echotherm Hotplate Stirrer Fully Programmable 8'x8' Ceramic Top 230V

The Echotherm HS70 is a fully programmable, corrosion resistant, hotplate stirrer. It is ideally suited to corrosive environments where other hotplates could be damaged or destroyed by vapours and spills.

The HS70 hot plate can be purged, creating a positive gas pressure inside the unit to prevent corrosive gasses from entering through the few holes in the chassis. The purging of HS70 hotplate stirrer is achieved by passing an inert gas through a fitting provided on the rear of the unit.

Features:

• Fully Programmable; memory holds 10 programs of 10 steps each.
• Non-programmable operation is also available
• Digital display of all functions
• 8"x 8"/ 203mm x 203mm ceramic top
• Controllable plate surface with in-plate sensor
• Control solution temperature with included PTFE probe
• Borosilicate and stainless steel immersion probe available separately
• NPT pipe to pipe, 1/4" purge gas fitting on the rear of the unit
• 600 watts of heater power
• Temperature settable from room temperature to 450°C
• Temperature ramping up or down from 1°C to 450°C per hour
• Heater settable and readable to 1°C
• Stir from 100rpm to 1500rpm controlling to 10rpm
• Timer to 99 hours with audible alarm
• User settable Auto-Off turns heater and stirrer off at the end of a countdown timed event
• Electronic calibration traceable to NIST. Certificate provided with unit
• RS232 I/O port for control or data collection by PC