EBI 16-logger for routine checks of steam sterilizers with Bowie-Dick Logger The set contains:1 x Data logger EBI 16Requires Interface IF 150 and Winlog. Med to operate. The EBI 16 is designed to ensure use without calibration or service.
The Ebro data logger EBI 16 is a measuring system for checking steam sterilizers without relying on traditional chemical indicators. This system can check relevant sterilzation parameters such as vacuum, compensation time, hold time and sterilization temperature. Also, steam penetration analogous to a Bowie & Dick Test can be checked.
The temperature inside a measuring chamber is compared with the outside temperature. If there is a temperature difference, then this is caused by insufficient steam penetration. On the basis of the temperature difference and of the behaviour of both temperature curves, a statement can be made regarding the cause of the insufficient steam penetration (leakage, insufficient vacuum, air injection).
Essentially, here the same method is used as in determining steam penetration with a Helix PCD (process challenge device). Only here, a physical temperature measurement is used instead of a chemical indicator.
Winlog.med or Winlog.med software Validation automatically evaluates the temperature difference during readout and presents the results and, where applicable, with a cause of error. The user is presented with a simple pass fail result.
Unlike traditional Bowie and Dick chemical indicators there is an actual record of performance and an indication of the cause of the failure, giving an engineer relevent informatyion and ensuring any down time is minimised
For more information on this product please click the Request information button below and we will get back to you as soon as we can.