Meter with box and instructions - No Reagents included
Each DR300 Pocket Colorimeter comes as a ready-to-use kit in a sturdy customcarrying case (4660200), including batteries, sample cells(2427606), manual,and Hach Communication Dongle (LPV446.99.00012). Reagents not included andhave to be purchased separately.
Reagents codes are:
1132278-Rubber Stopper Pack of 6
1133325-AccuVac Snapper Kit
1133472-AccuVac Ampoules Ozone 0-0.75mg/l Pack of 25
1133470-AccuVac Ampoules Ozone 0-0.25mg/l Pack of 25
Connected
Optional Bluetooth connectivity allows you to safely transfer measurement data to Claros Hach Water Intelligence System reducing errors and saving time by elimin ating manual data entry.
Reliable
Rugged, waterproof (IP67) design withstands whatever conditions you encounter in the field (drops, extreme temperatures, rain and dirt) and still delivers years of dependable, accurate measurements.
Simple
Simple, intuitive operation reduces potential manual error, ensuring accurate measurement data you can trust, time after time. Larger display with improved backlight makes reading measurements in all conditions even easier.
Absorbance:
0 - 2.5 Abs
Data Logger:
Last 50 measurements
Detector:
Silicon photodiode
Dimensions (H x W x D):
34 mm x 69 mm x 157 mm
Display:
LCD with backlight
Enclosure Rating:
IP67, waterproof at 1 m for 30 minutes
Measurement Method:
Indigo Trisulfonate
Operating Conditions:
0 - 50 °C (32 - 122 °F); 0 - 90% relative humidity (non-condensing)
Parameter:
Ozone
Power Supply:
Four AAA alkaline batteries; approximate life is 5000 tests
Range:
0.01 - 0.25 mg/L O3
0.01 - 0.75 mg/L O3
Sample Cell Compatibility:
1 cm (10 mL), 25 mm (10 mL)
Spectral Bandwidth:
15 nm filter bandwidth
Wavelength:
600 ±2 nm
Weight:
0.25 kg (0.55 lbs.)
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
Request a quote for your servicing requirements today.