The direct contact between the load and the heatable thermoshelves in the chamber of the vacuum oven ensures rapid and uniform temperature control of food, cosmetics, watches, books, PCBs or injection moulds, without the loss of heat.
Low-temperature vacuum drying enables pharmaceutical or food labs to gently dry bacteria and starter cultures in the cooled vacuum oven VOcool. Furthermore programme-controlled storage and transport scenarios for determining the behaviour of active ingredients or volumes at different pressure and temperature conditions can be simulated.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
Camlab offer a very wide range of calibration and validation options for your Memmert chamber. We can provide these services to all Memmert chambers even if purchased via a third party.
Validation of your new Memmert Chamber
Calibration services (single point at up to 3 temperature / humidity values)
Camlab can calibrate your chamber at up to 3 different temperatures and/or humidity values of your choice either prior to delivery at the Camlab Cambridge site or after delivery at your facility (receive significant discounts when this is done at the Camlab Cambridge site).
The unit is calibrated when the probe is placed in the middle of the chamber (single point calibration).
Installation Qualification (IQ) services for new Memmert chambers
This covers basic initial checks of the packaging, documents, software, ancillaries, damage, ambient readings and basic training. IQ services are provided free when purchasing the OQ services from Camlab.
When IQ is performed at the Camlab Cambridge site prior to delivery, this will exclude measuring ambient temperatures and the checking of local power supplies. Training will be supplied via remote live web based connection.
Operational Qualification (OQ) services for new Memmert chambers
This covers checking the display functions, fan control, USB port (Memmert plus units only), temperature and humidity control, over temperature alarms, and full temperature mapping.
Temperature mapping is carried out at either 9 points (small chambers) or 27 points (larger chambers). Temperature mapping is carried out at temperature and humidity settings of your choice. OQ generally takes a minimum of 1 day to complete.
OQ can be completed either prior to delivery at the Camlab Cambridge site or after delivery at your facility (receive significant discounts when this is done at the Camlab Cambridge site).
Please note 3 grid style shelves are required to fully complete the OQ temperature mapping
Performance Qualification (PQ) services for new and existing Memmert chambers
This covers the temperature mapping of your chamber once it is loaded with your product. The probes are placed in as near to their normal location as is possible. The PQ process does not include optimization but it can be repeated up to 3 times.
Temperature mapping including calibration of your existing Memmert chambers
This covers the temperature mapping of your existing chamber. Temperature mapping is carried out at either 9 points (small chambers) or 27 points (larger chambers). Temperature mapping is carried out at temperature and humidity settings of your choice.
Camlab can carry out the temperature mapping in 2 alternative ways:
Camlab provide free basic user training with every chamber. This free training is provided via remote live web based connection.
For detailed quotations and validation enquiries please call 01954 233110 or email email@example.com
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.