Cole-Parmer CN-200-800 Analog Heating Controller, 800 W 230 V

The Cole-Parmer CN-200 series heating controllers have been designed to control the heating of resistive loads for bench top operation. The heating controllers deliver different levels of power according to your requirements and are suitable for EM series Electromantles, the Electric Bunsen and Heating Tapes.

Features

• 4 different models of 1-way heating controllers
• Operate up to 800W, 1100W, 1800W or 2300W respectively

Each heating controller has two neon indicators: "Power On" white neon light and "Mantle/Bunsen Heater On" amber neon light. They all have a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the heating controller's amber neon light will pulsate to show that power is being supplied to the equipment being controlled, e.g. mantles, heating tape. The pulse frequency will decrease as the regulator control knob setting is increased, and at maximum setting, the amber neon will be continually illuminated.

A support rod clamp is provided at the rear of each heating controller to take a standard 12.5mm (1/2") diameter rod. They have a short mains lead with an IEC socket to connect them to the resistive load. An accessory extension mains lead is available where remote operation is required, e.g. in a fume extraction unit. The heating controllers can be mounted on standard 1/2" (12mm) diameter scaffold or retort stands, they can also be wall mounted using a mounting bracket or stand directly on the bench.

Effective May 2022, the Electrothermal heating controller Model number MC5 has now been rebranded Cole-Parmer under Model number of CN-200-800. All the same great features and specifications, just with a new and improved look.