Climacell ECO by MMM are a range of high quality climatic chambers providing active temperature and humidity control
Climacell ECO by MMM are a range of high quality climatic chambers providing active temperature and humidity control, ideal for applications were reproducible for active simulation of specified temperature and humidity conditions, with the option of also adding lighting conditions.The Climacell range are designed for applications where precise reproducible simulations of climatic conditions are required, such as stability testing, ageing experiments and with plant and tissue cultures. The refrigerant is R 134a (CFC-free) and requires demineralised water for humidity generation.
A wide range of optional equipment, accessories and extras are available, please enquire with us about the availability of these options with your chosen model.
The range is available with the following internal volumes: 111, 222, 404, 707, 1212 liters.
Operational and performance validation options (IQ,OQ) available.
These units feature the ECO line controller:
| Working temperature range | without humidity: from 0°C up to +100°C |
|---|---|
| Working temperature range | with humidity: from +10°C up to +95°C |
| Setting accuracy temperature | 0.4 °C |
| Humidity | humidity supply with distilled water from external tank |
|---|---|
| Humidification | humidification by hot steam generator |
| Humidity | 10-98% RH |
| Lighting | Optional extra equipment |
|---|
| CO2 | Optional extra equipment |
|---|
| Shelves | 2 supplied |
|---|---|
| Door | inner glass door |
| Dimensions | w(A) x h(B) x d(C): 940 x 1415 x 520 mm |
|---|---|
| Volume | 707 L |
| Max. number of shelves | 19 |
| Max. loading of chamber | 130 kg |
| Max. loading per shelf | 50kg |
| Dimensions | w(D) x h(E) x d(F): 1460 x 1905 x 860 mm incl. Door and handle, and Rollers |
|---|
We want the process of purchasing a test chamber to be as simple as possible. Below we provide some extra information and links to our specific guides.
|
|
|
|
|
What is a test chamber? A test chamber is used to simulate environmental conditions and this can be used in many applications including stability testing in a range of industry types. But how exactly is it different to a humidity chamber or an incubator? Can these units be certified medical devices? Can they perform testing in accordance with any recognised standards? What water supply is needed for a humidity chamber? If you want to know this and more including answers to an array of our most asked questions click here. |
Choosing the right test chamber Choosing the right test chamber for your application can be a bit of a minefield, with such a large selection available from our supplied brands Memmert and MMM Medcentre. Here we list the differences between chamber ranges such as what exactly the different controller types are and how this impacts use and other points to consider when selecting the most suitable chamber. |
Caring for your test chamber Test chambers are a costly purchase so you will want to keep it in top shape. You should be wiping down the chamber inside and out and be careful with how you load it to ensure efficient operation. If you want to know what else you should do to maintain your chamber and actions to follow to keep it working at its best then you can check out this page. |
If you require any further assistance, or extra information you can request that here and one of our trained technical specialists will be in contact. Please provide as much detail as possible so that we can get back to you with the right information.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
The stability and degradation of products over time is an important issue to consider in the food manufacturing industry - not only in terms of the quality of the product but also with regards to bacterial growth and shelf life testing. [caption id="attachment_5875" align="aligncenter" width="224"] The IPP range of incubators are a popular choice for shelf life testing in the food industry[/...
Add to Wish List
Add to Compare
Print Page
