Carry case for SD 400 Optical Dissolved Oxygen meter

Lovibond has two variations in this range fo waterproof handheld meters:

SD 300 Series

Three different models of this meter for the determination of pH/Redox/Temperature, Conductivity/TDS/Salinity/Temperature and  Dissolved oxygen (O₂)/O₂ -Concentration/O₂ -Saturation Temperature

SD 300

Additional Display for pH Electrode - pH Calibration Automatic Buffer Recognition. Permissible electrodes data: Asymmetry: ± 55 mV / Slope: 45 ... 62 mV/pH The condition of pH Electrode is checked at each calibration.  1, 2 or 3 point calibration with Lovibond® Standard Buffer, DIN 19266 Buffer or any manually entered Buffer values.

Redox Measurement (ORP) 2 options:

• “mV” Standard Redox or mV measurement
• "mVH” Conversion to hydrogen systems according to DIN38404 Part 66

rH Measurement -The rH value is calculated from a measured Redox value and a manual input pH value

72 46 10 - SD 300 pH (Set 1)

Contents instrument, batteries, pH/temp. plastic-electrode type 231,pH-buffer-set (pH 4.01/7.00/10.01), in case, manual, warranty information in case

72 46 11 - SD 300 pH (Set 2)

Contents instrument, batteries, but with pH/temperature plastic-electrode type 226, temperature sensor Pt1000, manual, warranty information in case

72 46 00 - SD 300 pH (basic unit)

Contents without electrode, with batteries, protective armouring, instruction manual, warranty information in case

SD 310 Oxi

Measurement of:

• Oxygen partial pressure, Oxygen Concentration, Oxygen Saturation, Temperature measurement
• Automatic absolute air pressure measurement
• Easy calibration against oxygen in the air
• Sensor evaluation
• Salinity correction
• Self-polarising galvanic oxygen probe allows instant measurement after system is switched on

72 46 50 - SD 310 Oxi (Set 1)

Contents the instrument, batteries, oxygen sensor with 1.5 m cable, electrolyte solution (KOH) 100 ml and 2 pcs. spare membrane heads, instruction manual, warranty information in case

72 46 60 - SD 310 Oxi (Set 2)

Contents instrument, batteries, but with oxygen sensor with 10 m cable, electrolyte solution (KOH) 100 ml, spare membrane heads (2 pcs.), instruction manual, warranty information in case

72 46 65 - SD 310 Oxi (Set 3)

Contents instrument, batteries, but with oxygen sensor with 30 m cable, electrolyte solution (KOH) 100 ml, spare membrane heads (2 pcs.), instruction manual, warranty information in case

SD 320 Con

• Salinity measurements - Salinity means the sum of the amount of all dissolved salts in water. The unit is g / kg.
• TDS measurements (total dissolved solids) - TDS means the mass concentration of dissolved media in a liquid. The unit is mg/l.
• 5 Ranges Determination of resistivity
• 4 Cell constants values

72 47 00 - SD 320 Con (Set 1)

Contents instrument, batteries, conductivity cell LC 12 (measuring range 0 - 200 mS/cm), manual, warranty information in case

72 47 20 - SD 320 Con (Set 2)

Contents instrument, batteries, conductivity cell LC 16 (measuring range 0 - 1000 mS/cm), manual, warranty information in case

72 47 10 - SD 320 Con (Set 3)

Contents instrument, batteries, pure water conductivity cell (measuring range 0 - 100 mS/cm) manual, warranty information in case

SD 400 Oxi L

Measurement of dissolved oxygen at an advanced level.

The SD 400 Oxi L allows the measurement of dissolved oxygen in a convenient and simple manner. The determination of dissolved oxygen in water is based on optical luminescence technology. This is characterized by fast response time and a particularly low maintenance requirement. Combined with high accuracy, this technology offers great benefits to the user. 

For oxygen measurement by means of luminescence technology, the following advantages are obtained compared to galvanic sensors and Clark sensors:

• High accuracy
• No sample flow is needed
• Low maintenance
• No oxygen consumption in the measuring medium
• No pollution of ambient medium
• Long-life sensor membrane
• Robust measurement even in sulfide-containing samples

Additional features of SD 400 Oxi L

• Waterproof sensor IP 67
• Backlit LCD 
• Internal data storage
• Software for monitoring and storage of data
• Micro USB port
• Comfortable fitting to BOD Karlsruhe NS 19 / 26 (16.4 mm ø and above)

740000 - SD 400 Oxi L, (Set 1)

Contents instrument, 4 (AA) batteries, optical DO probe with 1.5 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case

740010 - SD 400 Oxi L, (Set 2)

Contents instrument, 4 (AA) batteries, optical DO probe with 3 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case

740020 - SD 400 Oxi L, (Set 3)

Contents instrument, 4 (AA) batteries, optical DO probe with 10 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case

Lovibond has two variations in its range of waterproof handheld meters.  These electrochemical measuring instruments are designed for safety, mobility, and ease of data retention and storage. The data loggers regularly save the collected measurement data which can be transferred to the computer via USB interface (serial or analogue). With the SD 305 series, the instrument is protected with armoring and the electrode holders can be handled comfortably with one hand even under adverse conditions. With its luminescence technology and drift-free optical measurement, the SD 400 Oxi L offers analysis at the highest level with low maintenance requirements.  

SD 300 Series

 These are portable handheld instruments for the determination of pH values. It is reliable, waterproof (IP67), and robust, making it an ideal solution for on-site analysis.  Three different models of this meter for the determination of pH/Redox/Temperature, Conductivity/TDS/Salinity/Temperature, and  Dissolved Oxygen (O₂)/O₂ -Concentration/O₂ -Saturation Temperature.

Key benefits:

• Rugged, water-resistant (IP 67)
• PC interface (USB / serial or analog)
• Automatic buffer detection
• Data logger and alarm function (min./max.)

Available models:

SD 400 Oxi L

 SD 400 Oxi L portable meter combines measurement f dissolved oxygen at an advanced level with low maintenance thanks to state-of-the-art luminescence technology it is suitable for research and teaching, use in sewage and waterworks, and aquaristics.

The electrode of the SD 400 Oxi L is optimized for standard BOD bottles (NS 19/26). The device is therefore ideally suited for standard-compliant BOD determination of the dilution BOD.

Key benefits:

• Luminescence technology
• High accuracy
• Low maintenance
• Drift-free, optical measurement

Available models:

    For further information including pricing on set models please contact support@camlab.co.uk.

Servicing Options Available

Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.

The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.

Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.

Request a quote for your servicing requirements today.

Quote Request