Wet laboratory benches with small sink

Laboratory Benches With Sink

About the range:

KitLab, supplied by Camlab is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required.

Kitlab benches are 900mm high as standard and constructed of laminate with water-resistant white melamine in areas, with any edges covered in plastic.

Benches are available in choice of four worktop materials, in a number of widths up to 1800mm wide. A choice of either 600mm depth (with 600mm metal frame) or 750mm depth (with either 600mm or 750mm metal frame) is available. 

With the 750mm frame there is the ability to add a skirting shelf at a later date, this is not possible with the 600mm frame. 

Each bench is supplied with:

• 1 x Sink (150x300x90mm) (taps not included)
• 1 x dry worktop in 600mm or 750mm depth
• Epoxy coated metal frame (red as standard but also available in white) with depth of 600mm or 750mm. Frames have two legs for benches up to 1500mm wide and three legs for those that are 1800mm wide.
• 1 x fascia strip (white as standard, choice of yellow or blue)
• 1 x fluid back panel
• 1 x assembly strip
• 2 or 3 x wall leaves to support the benchtop for 750mm deep benches

Sink Material depends upon bench material:

• Enamelled glass: black PP
• Postformed laminate: black PP
• Stretched sandstone: white sandstone bowl
• TRESPA (Composite resin): black PP 

Worktop Materials
Benches are available in a choice of four worktop materials

• Moulded laminate
• Enamelled glass
• TRESPA
• Sandstone

For a detailed guide to the technical specification of each material type, please read the ‘Worktop Materials’ tab.

Customisation:

• Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours)
• Sliding door kit to enclose the bottom of benches- 
• Taps (please note:table moiunted taps are not possible with enamalled glass worktops)
• Electrical sockets

Other benches available in the range:
The following bench pieces are also available. Each piece is available with and without a skirting shelf.

• Dry Bench with 600mm or 750mm work top
• Wet bench with sink and skirting shelf
• Bench with cut out for placing under fume hood
• Sink unit
• Corner piece
• Weighing table