IDS electrodes reliable and precise pH measurements with automatic electrode recognition
Each ID sensor is equipped with a transponder, which carrys the relevant information such as type and serial number as well as the date and result of the last calibration. The exchange of this data between ID sensor and ID measuring instrument is fully automatic. Please note an IDS compaible meter is required to use these electrodes The ID sensors tranfer their own specific data onto the ID instrument. This increases the reliability and convenience enormously. An ID instrument can connect to multiple ID sensors or one ID sensor can be used on multiple instruments with recognition, without having to recalibrate at every exchange. With every new calibration the calibration data on the sensor is updated. For any following meausement the ID instrument use the new calibration. When ID sensors and ID instruments are used, the calibration and measurement report will also state type and serial number of the electrode, and it will state date, time and measuring value.