01954 233 110
By using Bench Vent units you are providing at-source filtration of potentially harmful pollutants which is essential during employees’ general daily work processes.
Available in a variety of types and sizes to suit most applications, enclosures are in the form of powder coated steel hoods or clear shields and containment hoods allowing for maximum visibility. Arm extraction units are available for soldering and laser etching with our DustPro units for light dust applications.
With unit giving turbulent-free airflow, extremely accurate balance readings are possible without affecting operator protection. Applications include the filtration of fumes, vapour and particles emanating from; monomers, adhesives, hazardous powders/particulates (when EPA or HEPA filters are used), resins, sealants, solder and organic solvents. They would not be suitable for use with high-toxicity chemicals or potentially dangerous substances, and these should be used in conjunction with a fume cupboard as usual.
For heavier applications we have a range of downdraught benches which are self-contained, providing dust and fume extraction and filtration and a workbench, in one compact unit.
Please bear in mind that if possible, a unit that ducts to the outside atmosphere will be the most efficient.
OPERATION OF BENCHVENT BV930H-D
All WS filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The Flexi-ducts can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability and/or convenience. All handling and/or use of potentially harmful substances is carried out within the hood enclosure in front of the intake filter area. For artwork applications, standard A1drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
These fume cabinets are designed for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-ducts.
We would appreciate your feedback.
No, thank you.