Automatic Pipette Washer 734mm high - needs basket and jar for use

High quality and high speed.

Solves the problem of washing pipettes up to 600 mm long and Mohr burettes quickly and safely.

lndispensable in the laboratory where radioactive, caustic and toxic materials are in use.

The polyethylene rinser fills via the spray nozzle situated on the top rim. This eliminiates backsyphoning as the water inlet is located above and away from any contaminated waters. Contaminated waters will syphon out totally, once the syphon point at the top of the rinser has been reached, via the large diameter drain situated at lowest point, before refilling automatically.

During washing the pipettes/burettes are housed in specially designed baskets which minimise breakages as it buffers the tips of pipettes against the soft polyethylene base. Since soaking takes the longest time, two or three baskets pipettes/burettes can soak in their jars whilst another basket full is being washed in the rinser. Low water flow rate is NOT a problem but it is better to adjust the flow for a cycle of about 90 secs.

Suggested basic sets:

• For washing pipettes; 1 x KL/217, 2 x KL/219, 1 x KL/218
• For washing burettes; 1 x KL/215, 2 x KL/219, 2 x KL/1219, 1 x KL/218