Cole Parmer Stuart Water Stills for distilled water

Stuart cabinet style Water Stills for distilled water

This is part of the Stuart WS-200 range and comprises of three cabinet style models, with a choice of single or double distillation at an output of up to 8L per hour (single) and 4L per hour (double). These stills are the most advanced out of Stuarts water still range and features enclosed an distillation still with fully automatic operation. The high-quality borosilicate glassware coupled with silica sheathed heaters gives pyrogen-free distillate of the highest purity from virtually any raw water supply.

Features:

• Available as a choice of single or double distillation units
• Single distillation units available with 4L per hour or 8L per hour output rates
• Double distillation unit has 4L per hour output rate
• Produces the highest quality distilled water of all Stuart Water Stills - The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. This produces cold distilled water ready for immediate use and pre-heats the boiler feed to increase efficiency.
• Safe Operation - A flow sensing device will detect any reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low-pressure supplies down to 3psi (20kPa). As a fail-safe device, there is an over-temperature thermostat mounted in the boiling chamber. The Stuart Aquatron A4000 is very easy and safe to assemble and maintain. Both the acrylic safety screen and the cabinet lid are removable giving unrivalled access to the glassware components. Screw threads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage.
• Reservoir level control - Every Aquatron® water still is supplied with a reservoir level control which means heating will automatically turn off once water reservoir is full. 
• Automatic - once the levels in the reservoir drops, the water still will restart making it fully automatic. 
• Can be bench or wall mounted
• Easy to clean - All glass construction allows rapid descaling using strong mineral acids. A built-in "clean" function and integral acid addition funnel make the cleaning operation simple and safe with no need to dismantle any of the glassware. A large bore stopcock with PTFE key is fitted for easy draining of chemicals after cleaning.