£888.87 excl. VAT
£1,066.64 inc. VAT
The Acura Electro 926 range includes a microprocessor-controlled motor and rechargeable battery pack. It also contains an intuitive software avoiding any complicated programming steps. Eight models cover the volume range 0.1 to 1000 µL. Additional interchangeable volumetric modules available as accessories.
Mode |
Action |
Suitable for |
| Forward | Aspiration and pipetting of set volume | All daily pipetting applications |
| Reverse | Aspiration in excess followed by dosing of set volume | Viscous, volatile and foaming liquids. Enhances reproducibility below 20 µL |
| Stepper | Tip filling and step-by-step distribution | Aliquot samples |
| Dilution | Aspiration of 2 or 3 different volumes for restitution in one shot | Dilution samples |
| Tactile | Monitoring of aspiration or distribution while touching activation button | Measurement of unknown volumes, gel loading or titration |
| Mixing | "Up and down" liquid flow in the tip / vial | Sample mixing in small tubes |
Volume |
Inaccuracy (E%) |
Imprecision (CV%) |
|||||||||||
Range |
Division |
Min. vol. |
Mid. vol. |
Max. vol. |
Min. vol. |
Mid. vol. |
Max. vol. |
||||||
| 0.1 - 2 µL | 0.01 µL | <± 2.5 %1) | <± 1.2 % | <± 0.9 % | < 2.5%1) | < 1.5 % | < 0.8 % | ||||||
| 0.5 - 10 µL | 0.05 µL | <± 1.2%2) | <± 0.8 % | <± 0.6 % | < 1.5 %2) | < 0.7 % | < 0.35 % | ||||||
| 0.5 - 10 µL | 0.05 µL | <± 1.2%2) | <± 0.8 % | <± 0.6 % | < 1.7 %2) |
< 0.8 % | < 0.4 % | ||||||
| 1- 20 µL | 0.1 µL | <± 1.2%2) | <± 0.6 % | <± 0.5 % | < 1.2 %2) |
< 0.4 % | < 0.3 % | ||||||
| 2.5 - 50 µL | 0.25 µL | <± 1.0 %2) | <± 0.6 % | <± 0.5 % | < 0.7 %2) |
< 0.3 % | < 0.25 % | ||||||
| 5 - 100 µL | 0.5 µL | <± 1.0 %2) | <± 0.6 % | <± 0.5 % | < 0.7 %2) |
< 0.3 % | < 0.2 % | ||||||
| 10 - 200 µL | 1.0 µL | <± 1.0 %2) | <± 0.6 % | <± 0.4 % | < 0.6 %2) |
< 0.2 % | < 0.15 % | ||||||
| 50 - 1000 µL | 5.0 µL | <± 0.8 %2) | <± 0.5 % | <± 0.4 % | < 0.4 %2) |
< 0.15 % | < 0.1 % | ||||||
|
Performance values obtained with bidest water at constant temperature (± 0.5°C) comprised between 20 and 25°C,in accordance with ISO 8655. Results can be improved by individual calibration in each mode. |
|||||||||||||
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
Products in this Range
