- Home
- Products
- PPE
- Gloves Disposable
- Latex Gloves
- Shieldskin Xtreme Sterile Latex 330 Di+
Shieldskin Xtreme Sterile Latex 330 Di+
Add to Wish List
Add to Compare
Print Page
Powder free sterile latex gloves designed for cleanroom use made from latex to clean room standard DI+
69 576X series from shield scientific offer the following features:
STERILE: Biocontamination control
Sterile cleanroom glove
Category III PPE glove (PPE Directive 89/686/EEC)
Complex Design - For mortal & irreversible risks
Powder-free natural latex glove
Hand-specific
330 mm / 0.18 mm (EN 420:2003 + A1:2009)
AQL 0.65 (EN 374-2:2014 Level 3)
Viral penetration test (ISO 16604:2004 Procedure B & ASTM F1671-97b)
Waterproof and for low chemical protection
Tested for chemical permeation (EN 16523-1:2015 supersedes EN 374-3:2003)
Typical particle levels: less than 950 per cm 0.5m
Type I hypersensivity & type IV hypersensivity reduced
Which Shield glove should I use - Chemical resistance guide for Shield gloves:
An easily searchable comprehensive resistance guide is available here. This is excellent for risk assessment and for evaluating personal protection to chemical exposure. This allows you to search by combinations of:
- CAS number
- Chemical name
- Glove type
It provides:
- Breakthrough times
- Shield glove comparisons
- Traffic light system to indicate suitability of a glove type to individual chemicals
- Protection level (based on exposure times)
IVD - Approved for medical Use
Medical Device Class 1 (MDD) according to the Directive 93/42/EEC.
| REFERENCE | SCOPE |
| EN 455-1:2000 | Medical gloves for single use – Part1: Requirement and testing for freedom from holes. |
| EN 455-2:2015 | Medical gloves for single use – Part 2: Requirement and testing for physical properties. |
| EN 455-3:2015 | Medical gloves for single use – Part 3: Requirement and testing for biological evaluation. |
| EN 455-4:2009 | Medical gloves for single use – Part 4: Requirement and testing for shelf-life determination. |
VAT FREE?
These gloves are classed as medical devices and as such have a VAT free status for research organisations who provide suitable documentation at point of order. If you are ordering online please state your requirement for VAT free in the order comments box or contact our sales office on 01954 233 110.
