Miele PG8504 AE AD Washer Disinfector

Model Features:


Performance / capacity
Preparing a batch: eg. Narrow-necked glassware up to 64 injectors and simultaneous preparation of further laboratory glass in the upper or lower basket

Structure
The sub-mounting / freestanding unit with lid
Exterior cladding: Stainless steel outer casing (AE)

Management
Touch Control control unit, control panel with a display Indications program required / actual temperature, remaining time, error messages Touch control on stainless steel

Programs
Short, medium, long, DEMI water rinsing, rinsing, 1 free program location

Standard equipment
4-fold filter system with flat screen, a coarse filter strainer on broken glass and fine microfilter, double wall construction with insulation for maximum noise reduction, flow meter to check the amount of water filling, blasting conclusion buzzer acoustic signal at the end of the program, 2 control temperature sensors, many safety devices, access to easy measurement and location of measuring sensors within the validation

Cleaning Equipment
Hygiene - washing with fresh water system with water change after each washing stage
BLPM pump with variable speed for optimum adaptation to the pressure washer in various stages of the program
Connection baskets back for less water and higher pressure washing
The newly developed spray arms with a revised layout and shape of the nozzles for highly efficient spray pattern
Injector system for thorough cleaning of hollow

Washing area
Thanks to laser technology, the washing area of €‹€‹high quality stainless steel welded without inequality, with particularly smooth welds, because there is no accumulation of dirt

Circulator
Powerful circulation pump Qmax. 500 l / min.

Dosing Technology
1 metering device / door for powder cleaner 1 metering device / door for polish / neutralizing agent 1 connection for the dosing module DOS G 80 or DOS G 80/1 for liquid media

Water softener
Water softener for cold and hot water up to 65 ° C

Water connection
1x cold water (KW) 1x transport pump for pressure-free water-AD (AD) WaterproofSystem (WPS)

Piped water
1 drain hose

Electrical connection

• 3 N AC 400 V 50 Hz 
• Heating [kW]: 8.5 
• Circulator [kW]: 0.7 
• Total input [kW]: 9,2
• Total input [kW]: 9,2
• Fuse [A] 3 x 16 

linkable to:

• AC 230V 50 Hz
• Heating [kW]: 2.5 
• Circulator [kW]: 0.7 
• Total input [kW]: 3.2 
• Fuse [A]: 16 

Accessories
Connection to DEMIN water for the final rinse fully demineralized water
Dosing modules for liquid media
Side housing a connection to DEMIN water or pumped media
Stand for ergonomic performance

Dimensions / Weight
External dimensions H / W / H [mm]: 835 (820) / 600/600
Net weight [kg]: 74

Compliance with Standards
Machinery Directive 2006/42 / EG, EN 61010-2-40, EN 61326 -1

Test marks and signs
VDE, VDE-EMC, IP21, CE