Do you perform many types of analysis but only process a few samples per day?

If so, we have the perfect solution for your laboratory: The TitraSip™ SA (stand-alone) system. The TitraSip™ SA is a stand-alone multi-parameter titration/ion analysis system designed for environmental and wine laboratories.

The TitraSip™ will automatically pipet the sample, run multi-parameter analyses, drain the analyzed sample directly to waste, automatically rinse the analysis vessel and probes, and then perform the appropriate non-titration analyses. The typical stand alone autotitration system cannot do this!

The TitraSip™ SA System consists of:

• PC Titrate™ interface
• TitraSip™ Module
• PC Titrate™ software
• 48,000 step buret drive
  

As easy as two clicks of the mouse to operate, TitraSip™ SA may be configured with or without an autosampler, depending on the number of samples you process. Connect directly to stream analysis for scheduled, operator-independent, multi-parameter analysis

Imagine, a single analysis station that occupies only 21" of bench space and analyzes the following with two simple mouse clicks:

-pH, conductivity, alkalinity (speciated), fluoride, residual chlorine, hardness, turbidity, dissolved oxygen and nitrate by UV! ALL IN A SINGLE SAMPLE! 

Key Features and Benefits:

• Verified by the US EPA’s Environmental Technology Verification (ETV) Program
• Conforms to EPA, Standard Methods, ASTM, AOAC and AOCS methods
• Automates pipetting/liquid handling
• Capable of analyzing samples by Titration, Conductivity, ISE analysis (i.e., Fl, NH3), Turbidity, Color (i.e., color, PO4), UV (i.e., NO3, phenols), Dissolved Oxygen (DO)
• pH/conductivity/alkalinity analysis in 4 minutes or less per sample (total cycle time dependent on alkalinity concentration)
• Measures only the required parameters per sample
  IntelliRinse™ system ensures system and probes are clean before moving to the next sample
• Only one system required to analyze multiple parameters
• Auto-dilution capabilities for high concentration samples
• Multiple results for the sample exported and printed in a single column which is easy to read and evaluate
• Create multiple sample batches easily and the TitraSip SA prompts the chemist when it is ready for the next sample
• Connect the TitraSip nearline system to a flowing system for automated scheduled analysis. For example, analyze pH, conductivity, alkalinity and turbidity every 30 minutes unattended!
• Add the SmartCal^TM  System for prescheduled, unattended daily calibrations, and QC checks.
• Connect directly to flowing sample lines for automated, scheduled near-line analyses
• TitraSip™ module integrates pipettor, rinse pump, analysis vessel and drain system into a single system - may be used with or without autosampler
• Capability to connect MANTECH AutoMax™ autosamplers for analysis - do up to 197 samples in a single run
  Capable of adding the MANTECH PC-BOD™ SA for BOD analysis

Imagine, a single analysis station that occupies only 21" of bench space and analyzes the following, with two simple mouse clicks - and the operator is free to complete other tasks!:

pH, Hardness, Alkalinity, Turbidity, Conductivity, Color, Residual chlorine, Dissolved oxygen, Ammonia, Phosphate, Chloride, Nitrate by UV! and Fluoride.

TitraSip™ SA is the only titration equipment verified by the US EPA ETV program. Ideal for municipal labs, effluent testing labs, environmental testing labs and more.