Brinometer 0 to 100% brine (%) Length 230mm

£16.07 excl. VAT
£19.28
incl. VAT

SKU - 1178216

10/621/0

SKU -

1178216

5 In Stock

Brinometers for gauging the strength of a brine (%) Solution. The brine (%) Tester, or Salinometer, is floated in the brine (%) solution giving a reading indicating the concentration of the brine (%). These high precision testers will gauge brine (%) solutions in the range of 0-100%. The scale is divisioned in increments of 1.0°C with an accuracy of ±1.0°C and adjusted at 15.6ºC. The material contained within the testers is made of steel shot ballast and synthetic wax resin.

A brine (%)ometer measurement is taken by the point on the scale it breaks the surfaces whilst floating in a salt solution. If your sample has high salt it will float to the surface. If a sample has low levels of dissolved salt, you will only see the tip of the brine (%)ometer above the surface. In this case you will need to make sure there is enough salt solution to prevent your unit from touching the bottom of the container and effecting your reading.