These units are designed for remote controlled applications on robotic and bench top systems using a PC. The RHB20 is very compact and designed to take up as little space as possible. The units measure 5.375"(136.5 mm) long by 3.50"(88.9 mm) wide by 2.00"(50.8 mm) tall without a sample block. Any number of RHB20™s can be used via the RS232 I/O port on each unit and any available PC serial ports. Any number of units can be set to any single temperature via a single computer serial port. The unit(s) will continue to run the temperature instructed even when the PC is disconnected and used to instruct another unit.Offered as accessories is the broadest variety of precision-made aluminum sample blocks available anywhere for standard
A heating and chilling dry block unit for use with remote control in robotic systems or on the bench top.
The EchoTherm RIC20 was designed for use in robotic systems. As such it is a small and self contained unit and comes with an RS232 cable for connecting it to a PC via serial port.
The serial command set is provided with the unit to give the user all the information needed to control it. Any number of RIC20 units can be connected to a PC using any of the available serial ports on the computer. After the unit has been instructed to go to a temperature it can be disconnected - it will retain the instructions until told otherwise.
As the unit heats of chills toward the target temperature, the LED on the unit will flash. When the flashing stops and the LED is constantly lit the unit is stable at the target temperature.
Complex time/temperature profiles can also be programmed via computer and software generated by the user. To run such profiles the unit must remain connected to the computer.
Control by PC or using the MIC remote terminal.
Wide range of aluminium blocks available to fit all sizes and shapes of centrifuge tubes, microtubes, test tubes etc.
Ideal for maintaining ligation reactions, storing oocytes, enzyme reactions and deactivations, hybridizations, PCR sample preparation, simple incubations including in 96 well plates and 384 well plates.
assay plates, deep-well assay plates, centrifuge tubes of all sizes, vials, and most any size test tube. Custom sample blocks can be made for any sample container by request. The RHB20 can be set to 0.1ºC and control temperature to 0.1ºC. Temperature settings are stable to ±0.2ºC and accurate to ±0.5ºC. Each unit comes complete with heater module, universal power supply, AC line cord for the country of use, and instructions including the Serial Port Command Set.
For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
Request Consultation |
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |