Echotherm H65 Programmable 5 position hotplate stirrer, 230V, 12' ceramic top

A fully programmable digital hotplate stirrer, advanced but easy to use. Program in stirring and heating parameters and store up to 10 programs for quick repeatable results.

In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.

Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.

The graph above shows a typical program which can be saved in the memory to re-run at any time. It can also be instructed to repeat itself from 1 to 98 times, or infinitely.

Key Features;

• 5 stirring positions - can be set to the same or different speeds
• 10 program memory stored in CMOS - no batteries required
• Each program can be 10 steps, with each step comprising of temperature, stirring speed, time and heating rate.
• Programmable and non-programmable operation
• Platinum RTD temperature measurement gives accuracy of ±1%
• Solid ceramic heater top for quick heating and good chemical resistance
• Temperature ramping for exact control of heating and cooling rates
• PID temperature control to 1°C on plate surface or solution
• Stir 5-800ml of aqueous solution from 100 to 1500 rpm
• Timer up to 99h 59m 59s with user defined auto-off
• Electronic calibration stored in CMOS
• RS232 interface for control or recording the data on a computer
• Custom display of all parameters all the time
• 12 months warranty